ULTIMA-TIG is constructed with a unique disposable container that automatically

collects all toxic dust particles, eliminating the need for separate exhaust systems. The container can be disposed of via your distributor or Inelco A/S. Cold wet grinding combined with the diamond wheels high grinding speed ensures that the tungsten electrode always has a polished and even surface with ULTIMA-TIG you will achieve the exact angle that you require.

A special locking device positions the electrode precisely, and the grinding is carried

out in the correct longitudinal direction along the electrode.A precise angle is not only important to the quality of the welding seams but it increases the number of re-ignitions between grinding, thus prolonging the electrode life.

ULTIMA-TIG is easy to use. Place the electrode in the electrode holder, adjust

the pointer to the required grinding angle and insert the tungsten electrode

into the combined stick-out and locking device. After the grinding has taken

place you can, if needed, flatten the tip by

placing the electrode clamp in the 90 position. ULTIMA-TIG is available in 220V and 110V and comes complete with a 2 metre

cable, 250ml bottle of grinding liquid, diamond wheel, electrode clamps (1.6mm-3.2mm), electrode holder, disposable container complete with liquid and a stainless steel stand. ULTIMA-TIG is CE marked and meets all current EU regulations.

Motor: 110/220V, 50/60Hz ·

Motor yield: 380W

Rpm: 8500/min · Grinding speed: 44 m/sec.